Some tips on Wood cnc router

1. The woodworking carving machine runs continuously for less than 10 hours a day to ensure the cleanness of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be short of water. The cooling water should be replaced regularly to prevent excessive water temperature. The circulating water should be as much as possible. The water tank with large capacity can be replaced.
2. After using the woodworking carving machine, pay attention to cleaning. Make sure to clean the dust on the platform and transmission system, and lubricate the transmission system (X.Y.Z three-axis) regularly (weekly).
3. If the woodworking carving machine is not used for a long time, it should be refueled regularly (weekly) to ensure the flexibility of the transmission system.
4. The woodworking carving machine shall regularly (according to the use) clean the dust in the electrical box, and check whether the screws of the wiring terminals are loose, so as to ensure the safe and reliable use of the circuit.
5. Woodworking engraving machine shall be checked regularly (according to the use) to see if the screws of all parts of the machine are loose. Instructions for use of CNC engraving machine
(1) Do not start the machine tool without knowing its performance and obtaining the permission of the instructor.
(2) It is forbidden to start the spindle without clamping the tool.
(3) It is strictly forbidden to carve without clamping the workpiece.
(4) It is strictly forbidden to touch the workpieces, cutters and other processing parts with your hands, or lean your body against the machine tool.
(5) The operator must stop the operation of the main motor when leaving the machine tool.
(6) In case of emergency failure of the machine tool, press the emergency stop switch and report to the instructor in time.
(7) After troubleshooting the machine tool, the engraving operation can only be carried out after the computer is restarted, otherwise the engraving origin will shift
(8) The operation shall be civilized. Tools, measuring tools and workpieces shall not be placed on the machine tool guide rail and the worktable.
(9) Strictly abide by the process operation procedures, and do not arbitrarily modify the operation procedures
(10) After the workpiece is processed. The machine tool and California I must be cleaned, the site must be arranged and the power must be turned off. (11) It is strictly forbidden to use the engraving machine for other purposes.

Jinan Hopetool CNC equipment is a professional company specializing in developing and manufacturing different kind laser machine.